iFlight BLITZ Mini F7 Stack (Mini F7 V1.1 + 55A 4in1 ESC)
FC // BLITZ Mini F7 V1.1 Flight Controller
Top Features:
DJI HD VTX Connector (Plug-and-Play / No soldering required)
2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000.
MCU: STM32 F722
Barometer: DPS310
Flash: 16MB (Blackbox flash)
Motor outputs: 4x (SH1.0 connector)Smartaudio / IRC Tramp VTX protocol supported
Beeper pad: Yes
Mount pattern: 20×20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
Weight: 5g
Wiring suggestion: UART 2 for a Receiver- UART 6 for ESC Telemetry
Tips
- SBUS, CRSF, ELRS, IBUS, DSM ETC… can be connected to any unused UART_RX, we suggest you connect to Uart_RX24.
- F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2
- Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
- F722 MCU has an inner inverter.
- – UART 3/4/5 for GPS or other sensors that require a serial port
- – UART 1 for VTX HD / Analog
- Dimensions: 30.5×27 mm
- Firmware target: IFRC-IFLIGHT_BLITZ_F722
- LED controller: Yes
- I2C serial: SDA / SLA pads
- UARTS: 6
- OSD Chip: AT7456
- Gyro: BMI270
- – FC indicator LEDs for visual debugging
- – Improved circuit design, better components and lower electrical noise!
ESC // BLITZ Mini E55 4-IN-1 2-6S ESC
- Specification:
– Mounting Holes: 20*20mm/Φ4mm- Supports 2-6S Lipo input- Constant: 55 Amps – Current sensor: Yes- Current rate: 100
– Firmware: BLHeli 32 - – Target: IFLIGHT_BLITZ_G2
- – Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
- – BEC: No
- – Burst: 60 Amps
- – MCU： G071
- – Weight: 11.3g
- – Dimension: 35*42mm
Package includes:
– 1pc x BLITZ Mini F7 V1.1 Flight Controller
– 1pc x BLITZ Mini E55 4-IN-1 2-6S ESC
– 1set x silicon grommets
– 1set x wire harness for F7 Flight controller
