Tattu’s Fun Fly Batteries are made for light practice sessions, but Envy and SedHendo don’t do light practice sessions, they do Li-Po battery torture! Thanks for the shout-out on your YouTube channel! Use code “envyastro5” or “sedhendo5” at checkout for 5% off!
Video Receivers, What are they? What do they do? A video receiver, also known as a VRX, is part of the FPV Drone eco-system. On the front of your aircraft, there is a mini-FPV camera picking up video and sending it into your VTX (Video Transmitter). This transmitter turns this video into a signal wave […]
Flight controller acting up? Need to move a motor? Resource mapping? Always work on your quad with the props off! If you’re having trouble with a certain motor, have tested it and the motor is not the issue, then check your ESCs. If you’ve tested the ESC and that is not the issue, well, then […]
How to pick a VTX? What’s it for? Always take your props off before working on your quadcopter! Class is in session. With FPV Quads, the amazing sport of racing and freestyling through First Person View, you must have a set up that includes an FPV camera, Goggles and a VTX. These are the things […]
Three main types of FPV flight! Which one is right for you? With an FPV Drone, you can fly so many different ways, and try different techniques, but there are three main types of FPV flight. You’re not locked in to any one type with your quad, but some drones are more specialized for each […]
What is FPV? For the new kid in class! Class is in session. FPV is an acronym for First Person View. So referring to our sport, we always throw an FPV in the sentence. There is nothing else in the world quite like flying first person view behind the wheel of an acrobatic, agile and […]
How do these affect one another, and how do I clean up my FPV video? Class is in session. What is Video Noise? There can be a lot of noise in a FPV copter build. There are different types of noise. One of the most annoying and hindering would be video noise. This noise, mostly […]
Setting up your Master Volume on a Taranis Radio Controller. Class is in session. Ever put your Taranis remote in Bind Mode, and the chirping drives you crazy? Ever been busy working on a recently crashed copter, and your Taranis keeps giving you an inactivity alarm? Well, we’re going to walk you through setting up […]
Flashing your BetaFlight Flight Controller Class is in session. Always take your props off when working on your quadcopter. There are a lot of issues that can be fixed by simply flashing your drone’s flight controller. If your copter is running older firmware and your BetaFlight configurator is new, your tabs will act all out […]
Sizing Propellers Always remove your props before working on your quadcopter. Class is in session. Sizing your props for your drone is very specific to the size of frame and motors.You need to determine how much space your copter arms will allow without chewing up your wires or smashing your camera. Each motor height and […]
- 1
- 2