iFlight BLITZ Mini ATF435+BLITZ Mini E55S FPV Stack
iFlight BLITZ Mini ATF435 & E55S 55A 4-in-1 Stack (20x20mm)
Unleash incredible power in a compact form factor with the iFlight BLITZ Mini FPV Stack. This electronics combo pairs the next-generation BLITZ Mini ATF435 Flight Controller with the robust BLITZ Mini E55S 4-in-1 ESC, creating a powerhouse for FPV drone builds that demand high performance without the bulk. It’s the perfect core for a lightweight 5-inch freestyle FPV drone or a powerful 4-inch racer.
Next-Generation Flight Control
The BLITZ Mini ATF435 flight controller is built around a powerful ArteryTek AT32F435 MCU and the high-performance BMI270 gyro. This combination provides lightning-fast processing and incredibly clean gyro data for a precise and locked-in flight feel. With 6 available UARTs, a built-in DPS310 barometer for accurate altitude readings, and 16MB of blackbox flash for easy tuning, this FC is packed with all the features a modern FPV pilot needs.
Extreme Power in a Mini Stack
The BLITZ Mini E55S ESC is a beast, capable of handling a massive 55A of continuous current (65A burst) on up to 6S LiPo power. This makes it suitable for even the most demanding motors on a compact build. It comes ready for modern performance with support for DShot protocols and Bluejay firmware, which enables advanced features like bi-directional DShot for RPM filtering, resulting in an even smoother and more responsive flight experience.
Key Features:
- Advanced AT32F435 MCU: Delivers lightning-fast processing power for the smoothest, most responsive flight experience with all modern Betaflight features enabled.
- High-Performance BMI270 Gyro: A modern, low-noise gyro providing the clean data needed for a locked-in feel and easier tuning.
- Massive 55A 4-in-1 ESC: Provides an extreme amount of power in a 20x20mm form factor, capable of handling the most demanding motors on up to 6S.
- Bluejay Firmware Compatible: Unlocks modern features like bidirectional DShot and RPM filtering on reliable and affordable BLHeli_S hardware.
- 6 Available UARTs & Barometer: Extensive connectivity for peripherals like GPS, plus a high-precision barometer for accurate altitude readings.
- Compact & Builder-Friendly: The 20x20mm mounting pattern and connectorized design make it perfect for clean, lightweight, and easy-to-assemble drone builds.
Specifications
BLITZ MINI ATF435 Flight Controller:
- MCU: AT32F435RGT7
- Gyro: BMI270
- Barometer: DPS310
- Blackbox: 16MB Onboard Flash
- BEC: 5V / 2.5A
- UARTS: 6
- Mounting: 20x20mm
BLITZ MINI E55S 4-in-1 ESC:
- Input Voltage: 2-6S LiPo
- Continuous Current: 55A
- Burst Current: 65A
- Firmware: Blheli_S / Bluejay Compatible
- Current Sensor: Yes
- Mounting: 20x20mm
What’s in the Box?
- 1x iFlight BLITZ Mini ATF435 Flight Controller
- 1x iFlight BLITZ Mini E55S 4-in-1 ESC
- 1x Power Cable & XT60 Connector
- 1x ESC to FC Signal Wire Harness
- 1x Set of Mounting Grommets and Screws