FETtec KISS G4-N AIO 35A – ESC & FC All-In-One
FETtec KISS G4-N AIO 3-6S 20×20 Flight Controller w/ 35A 32bit ESC
Check Out The MyFPV Adapter To Make Mounting Easy!
-
About this product
The FETtec G4-N 35A AIO is a powerful all-in-one board from FETtec, featuring a G473 flight controller and 35A ESC. This product has no onboard analog OSD, but the use of digital OSDs is still possible as usual.
Features
- Powerful G4-N flight processer for ultimate performance
- Two dedicated BECs for switchable power
- Full sine-wave control for the ESC
- A 20×20 mounted 35A AIO board
- KISS flight tuning from FETtec
Specifications
- Maximum outside dimensions: 30 x 37.5mm
- Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)
- Overall Height: 7.9mm
- Weight: 8.9g
- OSD: None
FLIGHT CONTROLLER
- Latest STM32G4 processor
- 170Mhz + Math accelerator
- MPU6000
- Designed for 12-25V supply voltage (3S-6S Lipo)
- 2x onboard BEC (max. 600mA each)
- 5V BEC for RX
- 5V/16V BEC for VTX (configurable and real pit*)
- 1x 8 pin connector for solderless connection to VTX, camera, and OSD of the digital systems
- VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
- 2x 4 pin connector for receiver and VTX
- Signal, telemetry, 5V, gnd
- Gnd, 5V, TX1, RX1
- 5 UART serials
- UART 1 free
- UART 2 is occupied by the receiver
- UART 3 free
- UART 4 occupied by OSD, can be used elsewhere depending on the configuration
- UART 5 is occupied by ESCs / TLM / Onewire
- Solder pads for RGB LEDs
- Supported ESC Protokole
- PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
- KISS FC firmware
*Real pit mode: supply pad switchable
4-IN-1 ESC
- Active current limiting: 35A
- Input voltage: 3s-6s
- High-quality 40V MOSFETs
- STM32G071 @ 64MHz
- PWM: Up to 128 kHz Motor
- Full sine wave control: Yes
- Automatic input signal detection: Yes
- PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
- Firmware: FETtec ESC
IMPORTANT NOTES
- *Real pit mode: supply pad switchable
Includes
- 1x FETtec KISS G4-N AIO Board – G4-N FC + 35A 32bit 3-6S ESC
- 2x 4 pin cable with JST connector
- 1x 8 pin cable with JST connector
- 1x Capacitor 50V 470µF
- Standoffs
We also have the FETtec 4-in-1 High Performance ESC available!
