Kakute F7 Mini FC & Tekko32 F3 4in1 45A Mini ESC Stack
Kakute F7 Mini Flight Controller
Check out our entire Holybro line of products.
Specifications:
- MCU: STM32F745VGH6Â 32-bit processor,216MHz, 320Kbytes RAM, 1Mbytes Flash
- IMU: ICM20689 (SPI)
- Barometer: BMP280
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 5.5 hardware UARTS (UART1,2,3,4,6,7)
- Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
- Onbord 16Mbytes for Blackbox logging
- 5V Power Out: 1.0A max
- 3.3V Power Out: 0.2A max
- Dimensions:Â 33x26x6mm
- Mounting Holes:Â Standard 20mm square to center of holes
- Weight:Â 4g
Package Includes:
FC board *1
M2Â Rubber rings *6
JST SH 8pin 30mm cable*1
JST SH 8pin 150mm cable*1
Manual:
Kakute F7 MINI Manual
Tekko32 F3 4in1 45A Mini ESC
BLHELI32 / F3 MCU/4x 45A
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed. 4x 45A F3 BLHELI32 ESC in 20×20 standard .Supports up to 50A burst and 45A continued.
SPEC:
- F3 MCU, runs double faster than F051
- 32bit ESC with BLHELI32 firmware
- Supports 3-6S lipo input
- PWM input, TLM supported
- Voltage output (VBAT)
- NOÂ BEC
- Supports oneshot / Multishot / Dshot PWM
- Supports damped light
- Ext. cap needed for 6s (470uf 35v for 6s usage.)
- Mounting holes M2, 20x20mm
- Size:30 x 36 mm
- Weight: 7.8g
Package included:
Tekko32 F3 4in1 45A mini ESC *1
Electrolytic capacito: 470uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1
PIN MAP: