TAKER H743 BT 8Bit 80A STACK

Please Check Out Our Other GEPRC Products! 

Push the boundaries of what your heavy-lift drone can do with the GEPRC TAKER H743 8Bit 80A Stack. Engineered specifically for professional cinematic rigs, X8 cinelifters, and extreme macro quads, this stack represents the pinnacle of GEPRC’s flight control technology. From its blazing-fast H7 processor to its massive 80A 4-in-1 ESC, every component is designed to deliver uncompromising power, precision, and reliability.

Unmatched H7 Processing & Dual Gyros

At the heart of this flight controller is the ultra-high-performance STM32H743 MCU, boasting a Cortex-M7 core running at a staggering 480MHz. This massive processing headroom easily handles complex Ardupilot, INAV, or Betaflight calculations. To guarantee absolute precision, the board features a dual gyroscope setup—pairing the legendary, noise-resistant MPU6000 with the modern ICM42688-P. This combination ensures completely locked-in, cinematic smoothness.

Built for X8 Cinelifters

Need to lift heavy camera payloads? The included TAKER H80_BLS 4-in-1 ESC pushes a monstrous 80A of continuous current (85A burst) to handle the most demanding heavy-lift stators. Furthermore, the flight controller features eight dedicated motor output ports, making it fully natively compatible with X8 coaxial drone configurations.

Massive Data & Clean Power

Tuning a large drone requires data. That is why GEPRC equipped this FC with a colossal 512MB onboard Blackbox, allowing you to record hours of high-resolution flight logs without running out of space. To power your power-hungry DJI Air Unit and HD accessories, the board features dual independent 5V@3A and [email protected] BECs protected by an integrated LC filter for a pristine, noise-free video feed.

Key Features:

• Next-Gen Processor: STM32H743 main controller running at 480MHz handles complex flight logic with zero lag.

• Dual Gyro System: MPU6000 + 42688-P dual gyros deliver unparalleled flight stability.

• Massive Storage: 512MB high-capacity black box for endless data logging and PID tuning.

• Heavy-Lift Power: 80A continuous 4-in-1 ESC comes with a heavy-duty XT90 cable and massive 4700uF capacitor.

• X8 Ready: Eight motor outputs and broad compatibility across Betaflight, INAV, and Ardupilot.

• Plug-and-Play HD: Direct plug connection for the DJI Air Unit (no micro-soldering required).

Specifications:

TAKER H743 Flight Controller

• MCU: STM32H743 (480MHz)

• IMU (Gyro): MPU6000 + ICM42688-P (Dual Gyro)

• Input Voltage: 3S – 6S LiPo

• Blackbox: 512MB Onboard

• Barometer: Integrated

• OSD: BetaFlight OSD w/ AT7456E chip

• BEC Output: 5V@3A / [email protected] (Dual Independent)

• UARTs: 7 Groups (UART3 fixed for BT)

• USB Interface: Type-C

• Dimensions: 38.5mm x 38.5mm (30.5×30.5mm Mounting)

• Weight: 8.4g

• Target: GEPRC_TAKER_H743

TAKER H80_BLS 80A 4-in-1 ESC

• Continuous Current: 80A

• Burst Current: 85A (5 seconds)

• Input Voltage: 3S – 6S LiPo

• Protocol Support: Dshot 150 / 300 / 600

• Ammeter: Supported

• Dimensions: 56.3mm x 61.1mm (30.5×30.5mm Mounting)

• Weight: 28.1g

• Target: B_X_30

What’s in the Box?

• 1x TAKER H743 Flight Controller

• 1x TAKER H80_BLS 80A 4-in-1 ESC

• 1x Massive Electrolytic Capacitor (50V 4700uF)

• 1x XT90 Power Cable (10AWG 230mm)

• 1x DJI Connection Cable (SH1.0 6-pin 100mm)

• 1x FC Adapter Cable (SH1.0 8-pin 30mm)

• 1x Receiver Silicone Cable (SH1.0 4-pin 150mm)

• 1x Camera Connection Cable (SH1.0-SH1.25 3-pin 60mm)

• 1x VTX Connection Cable (SH1.0 4-pin to 6-pin 100mm)

• 1x Hardware Kit (M3 Screws, Nylon Nuts, Silicone Anti-Shake Pads)