Airbot OmniNXT F7 Flight Controller – Omnibus
Check out all of our Airbot Products!
Experience the next level of flight control with the Airbot OmniNXT F7, a top-of-the-line flight controller for pilots who demand options and performance. The standout feature of the OmniNXT is its dual-gyro system, featuring both the classic MPU6000 and the high-speed ICM20608. Housed in an onboard damping box, this innovative design allows you to choose the perfect gyro in Betaflight for a flawlessly smooth and locked-in flight experience.
Choose Your Gyro
This board is like having two flight controllers in one. In your flight software, you can select which IMU to use:
- MPU6000: The legendary, battle-tested gyro known for its incredible noise resistance and smooth performance at 8k loop times.
- ICM20608: A more sensitive, high-speed gyro capable of running at up to 32k loop times, perfect for top-tier racing performance.
Feature-Packed for Any Build
The OmniNXT is built around a powerful STM32F722 MCU and is packed with connectivity. It features 6 hardware UARTs for all your peripherals and dual BECs, including a dedicated 8V filtered output for a crystal-clear analog FPV video feed. The board has a convenient 8-pin port for a plug-and-play connection to Airbot 4-in-1 ESCs, but also includes traditional solder pads for individual ESCs or custom builds.
Key Features:
- Dual Onboard Gyros: Choose between the ultra-reliable MPU6000 or the high-speed ICM20608 for the perfect flight feel.
- Powerful F722 Processor: Provides the processing power needed for all modern flight firmware features, including high-speed loop times.
- 6 Hardware UARTs: Ample connectivity for your receiver, VTX control, GPS, and other peripherals without compromise.
- Filtered 8V VTX Power: A dedicated BEC with an LC filter provides clean, noise-free power to your analog VTX and camera.
- Onboard Barometer: A built-in barometer provides altitude data for more stable flight or use with GPS.
- Plug-and-Play Ready: An 8-pin harness port makes connecting to a compatible 4-in-1 ESC clean and simple.
Important Note: This flight controller does not have an onboard current sensor. It is designed to read the current sensor data from a connected 4-in-1 ESC via the 8-pin harness.
Specifications:
- MCU: STM32F722
- Gyros: MPU6000 & ICM20608 (Selectable)
- Barometer: Yes
- Mounting Holes:
- Input Voltage: 3-6S LiPo
- BEC 1: (Buck)
- BEC 2: with LC filter (Buck)
- OSD: Betaflight OSD
Package includes:
- 1x Airbot OmniNXT F7 Flight Controller
- 1x Set of Mounting Grommets
