GEPRC F722-35A AIO (F722 FC 35A 2-6S 8bits BLS ESC 25.5mm)
Build a powerful, compact, and feature-rich FPV drone with the GEPRC F722-35A AIO. This all-in-one board integrates a high-performance F7 flight controller with a robust 35A 6S 4-in-1 ESC onto a single whoop-style board. Packed with builder-friendly features like a dedicated plug for the DJI Air Unit and 5 full UART ports, it’s the perfect, lightweight core for your next high-performance FPV drone kit.
Powerful F7 Flight Control
The F722-35A AIO is powered by a high-speed STM32F722 MCU, which has the processing power needed to handle all the latest Betaflight features with ease. This is paired with the legendary MPU6000 gyro, known for its clean and reliable signal, which translates to a smoother, more locked-in flight experience for your FPV drone.
Effortless Digital & Analog Builds
This AIO is designed for simple, clean builds. It features a dedicated 6-pin connector for a plug-and-play connection to a DJI Air Unit or Caddx Vista, making HD builds a breeze. With 5 full hardware UARTs available, you have plenty of ports to connect all your other drone parts, such as your receiver, GPS, and VTX control, without compromise.
Reliable 35A 6S Power
The integrated 4-in-1 ESC can handle 35A of continuous current per motor (40A burst) on up to a 6S LiPo battery. This provides plenty of power for a wide range of motor and prop combinations, from 3-inch micros to lightweight 5-inch freestyle FPV drones. It runs on reliable BLHeli_S firmware and supports DShot protocols for a precise digital motor signal.
Specifications
Flight Controller:
- MCU: STM32F722
- Gyro: MPU6000
- Firmware Target: GEPRC_F722_AIO
- OSD: Betaflight OSD w/ AT7456E chip
- Blackbox: 16MB
- UARTs: 5
- BEC: 5V @ 1A
4-in-1 ESC:
- Input Voltage: 2-6S LiPo
- Continuous Current: 35A x 4
- Peak Current: 40A (10s)
- Firmware: BLHeli_S (G_H_30)
- Supported Protocols: DShot600, Oneshot, MultiShot
What’s in the Box?
- 1x GEP-F722-35A AIO Board
- 1x XT30 Power Cable
- 1x 35V 220uF Capacitor
- 1x SH1.0-6Pin to GH1.25-8Pin Cable (for DJI Air Unit)
- 8x M2*6.5mm Damping Rings
