Speedy Bee Adapter 2
FULL-FEATURED BETAFLIGHT CONFIGRATOR IN YOUR POCKET
- Upgrade FC firmware via App
- Full-featured BF/iNav configuration
- XT60 & PH2.0 battery connectors
- 1-6S power input
UPGRADE YOUR FLIGHT CONTROLLER VIA APP!
- The WiFi chip in the Adapter 2 which greatly improves the transmission speed and makes it possible to upgrade your flight
- controllers The whole upgrading process costs only 2-3 minutes.
- The firmware flashing currently only supports Betaflight via WiFi connection to the Adapter 2.
FULL-FEATURED BF/INAV CONFIGURATION.
- Now the SpeedyBee Adapter 2 is a full-featured mobile
- BF/iNav configurator. Just go to the field to fly without carrying a heavy laptop.
POWER THE WHOLE THING WITH ONE BATTERY.
- Soldering work should be done on the user end on the previous generation. But the Adapter 2 now has built-in XT60 and PH2.0 connectors which both support 1-6S LiPo batteries input*. As the Adapter 2can power your flight controller, you don’t need another battery to power your quad.
- *For 1S batteries, 3.8V or above is requried. Because some(very few) quadcopters may consume a lot of current, and the output voltage of the adapter 2 will be greatly reduced.
- 1 x Adapter 2
- 1 x Maunal
- 1 x USB Cord
|Product Name||Speedy Bee Adapter 2|
|Power Input Voltage Range||1-6S(3.8V+ for 1S)|
|Power Input Interface||XT60-Male, PH2.0 male|
|Case Meterial||Heat-shrink Tubing|
|Liquid Silicone Cable Length(Pure Wire)||10cm|
|WiFi Transmission Distance||3 meters|
|Standby Working Current Under 5V||120mA|
|Maximum Output Current||200mA @5V|