We are proud to offer a Cidora SL5 4S FPV Drone – PNP with our best iFlight components installed and pre-tuned!

Different power version (4S, 6S cell count) to fit most pilots requirements.

Features：

– Full 3K Carbon Fiber airframe

– Easy arm swaps -215mm wheelbase，115g

– Popular Squish X configuration

– SucceX F7 TwinG Bluetooth with 50A 4in1 ESC stack

Specifications:

– Total Dimensions: 165*138mm (body dimension)

– Frame Wheelbase: 215mm

– SucceXF7 TwinG Bluetooth FC

– SucceX 50A 2-6s 4-in-1 ESC Dshot1200

– XING CAMO X2306 2450KV (4S )/ XING CAMO X2306 1700KV(6S)

– Caddx.us Ratel 2.1mm FPV cam

– Nazgul 5140 propellers

– Weight: 384.2 (without GoPro TPU mount)

PRE-TUNED & PRE-SETUP:

– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”

– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”

SucceX F7 TwinG BT Flight Controller(TwinICM20689)

– MCU：216MHz STM32F722RET6

– Gyro: 2x ICM20689（SPI）

– Baro: Yes (Altitude on your OSD)

– Betaflight OSD：YES

– Bluetooth wireless adapter (Antenna integrated, can be linked to the SpeedyBee smartphone app)

– Blackbox: Onboard 32MB

– 5x Uarts

– 8x Motor outputs

– 8-pin 4in1 ESC port

– 4-pin VTX connector

Betaflight 

-Betaflight 4.1 With RPM Filtering CLI Diff Download here

Older Betaflight:

-Betaflight Firmware：betaflight_4.0.5_STM32F7X2.hex

– Firmware target：IFLIGHT_F722_TWING.config

Physical 

– Mounting hole：30.5*30.5mm，φ4mm with Grommets φ3mm

-Size：36*36mm

-Weight：6.2g

SucceX 50A 2-6S 4-in-1 ESC Dshot1200

– Dimension: 43*39mm

– Mounting Holes: 30.5*30.5mm/Φ3mm

– Weight:14.4g

– Volts input: 2-6S

– STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware

– Current sensor: Yes

-Telemetry：Supported

– BEC: No

– Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.

– Target: iFlight-BL32-4IN1

– BLHeliSuite download (BL32):http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file

SucceX the Force 5.8GHz 800mW VTX

– The output power is stable;

– Transmit power 4 gear switch: 25mW/100mW/400mW/800mW;

– Output 40 channels.

– Frequency lock fast, the boot does not interfere with companions;

– Built-in output power self-check function;

– Full format video format: NTSC /PAL;

– Wide input voltage range. low power consumption:

7V～36V，+12V/380mA@800mW;

– Small size:36*36*3mm

– Mounting holes 4-M3

– Lightweight: 7.2g(excluding antenna)

Specifications:

– Item: SucceX-Force 800mW adjustable VTX

– Input voltage: 7-36V

– Output voltage/ Max current: 5V 1A

– 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@100mW，250mA@400mW, 380mA@800mW

– Channel: 40

– size:36*36*3mm

– PIT/25mW/100mW/400mW/800mW

Recommend Parts (Not included):

– TPU 3D Printed Camera Mount for Gopro Hero 5/6/7 with ND8 Filter

– TPU 3D Printed Camera Mount for GoPro Session

Recommend batteries (not included):

4S 1300mAh to 2000mAh

6s 1050mAh to 1500mAh

PRE-TUNED & PRE-SETUP:

– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”

– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”

Package Included:

-1x Cidora SL5 4S FPV Drone – PNP

-2 sets Nazgul 5140 propellers

-1 set LED Lights

NOTE: The Hero 7 camera and TPU print camera mount are not included.