Shendrones Thicc 2.0 – DJI Kit
Thicc is a 390mm 7″ X8 made to carry larger cameras like the Black Magic Pocket. The camera mounts with a 1/4-20 screw and straps.
Arms are 8mm carbon, main body plates are 2.5mm, bottom plate is 3mm. With 2 spots for 30×30 fc stacks, standoff height is 20mm. Feel free to request 25 or 30mm standoffs instead.
Recommended build uses 2 4-in-1 ESCs, the Lumenier Lux7, and Brotherhobby 2806.5 1300kv’s.
Full kit includes printed parts: landing gear, FPV cam mount, and cam mount dampers (both versions pictured). The DJI version also includes a sleeve for the air unit and antenna mounts.
You can print your own parts here.
Read more about it here.
The Thicc 2.0 is a longer deadcat layout with superior flying characteristics to the original.
The hardware pack contains:
16 m3x7, upper motors
16 m3x5, lower motors
8 m3x16 and 8 locknuts, motor mounts
12 m3x25 and 24 locknuts, arms and legs
14 m3x9, main body
10 m3x12, 10 washers, 8 locknuts, dampers
8 m3x20 standoffs
1 1/4-20 knob for camera