Xhover Stingy V2 FPV Frame – 5″
In the past couple of years there have been so many onboard electronics advances that it was absolutely necessary to update the Stingy frame. The current field of micro cams produce great images while reducing the footprint needed on the quad. With a smaller camera there is no need for a large cut out in the main plate. Because of this fact, we were able to design a much more robust frame to stand up to the racing demands most pilots put on their quads.
To keep things compact and light, we integrated a soft mount solution for the 20 x 20 FC and Vtx hardware, while keeping an option for the 30 x 30 stacks as well. Regardless of the build configuration you have, XHover has an entire line of 3D printed mounts to ensure the perfect fit for any and all of your flight hardware.
The absolute advantage of the Stingy V2 is in the flight performance. The V2 flies balanced because of the wide stance with a true X configuration. This wide stance and lower center of gravity contributes to a solid flight stability in the air and on the course.
Kevin Dougherty said it best “The original Stingy was the culmination of my experience in FPV and what I envisioned as the perfect frame for me. I stand by that statement and still consider it an excellent frame. However, much like a stingers swarm flight, technology does not slow its pace. I have seen so many improvements to the electronics that I felt it was time to update the Stingy to take advantage of those improvements.”
The bottom line is that it’s the little things that make a big difference when flying The Stingy V2 has stout 5mm arms that can take a solid hit and continue on, but if needed, are easy to replace. The soft mount 20 x 20 stack insulates all your electronics from many types of impacts. When all is said and done, you’ll find that the Stingy V2 can stand up to the demands that racers put on their quads on a daily basis.
- Soft mount for FC on the 20×20 stack.
- 20mm Standoffs
- Sticky Battery Pad
- Top Mount battery Design
- durable arms
- Plenty of room for a nice clean compact build
- easy single arm replacement
- 16×16 Motor Spacing
- 1x Stingy V2
- 1x Set of high-quality Steel hardware
- 1x Battery Strap
- 1x ESC sticker Sheet
- 4x Foam Landing Pads
- 1x Sticky Battery pad by Ummagawd Company, Designed specifically for the Stingy V2
- 1x 3D printed Camera mount attachment