TCXO ExpressLRS 2.4GHz
Check Out Our Other Happymodel Products!
Bring the incredible range, low latency, and reliability of ExpressLRS (ELRS) to your fixed-wing aircraft, gliders, and RC cars with the Happymodel EPW6 TCXO Receiver. Unlike standard ELRS receivers that require a flight controller, the EPW6 features 6 native PWM outputs, allowing you to plug servos and ESCs directly into the receiver for a streamlined, lightweight setup.
Built-in TCXO for Maximum Stability
Temperature changes can cause frequency drift, which leads to packet loss during long flights. The EPW6 comes equipped with a TCXO (Temperature Compensated Crystal Oscillator). This ensures precise clock frequency and reliable performance in extreme temperatures—whether you are launching a glider in the cold or flying a wing in the scorching summer heat.
True PWM Functionality
Designed specifically for models without Flight Controllers, the EPW6 provides 6 High-Speed PWM Channels perfect for controlling ailerons, elevators, throttles, and rudders. It supports a wide input voltage of 5V to 8.4V, making it fully compatible with modern HV (High Voltage) servos and 2S LiPo direct power.
Compact & Dual Antenna Design
Weighing less than 1.5g, this receiver is tiny enough to fit inside tight fuselages. It features two IPEX/U.FL antenna connectors provide antenna diversity to ensure a robust link regardless of aircraft orientation.
Key Features:
-
No FC Needed: 6x PWM outputs for direct servo connection.
-
Rock Solid: Built-in TCXO eliminates frequency drift.
-
ELRS Performance: Long-range 2.4GHz link with ultra-low latency.
-
HV Ready: Supports 5V – 8.4V input for high-voltage servos.
-
Versatile: Can also output CRSF Serial via TX/RX pads if needed.
-
Easy Updates: Update firmware effortlessly via Wi-Fi.
Specifications:
-
Model: Happymodel EPW6 TCXO
-
RF Frequency: 2.4GHz (ISM)
-
Channels: 6 PWM Outputs
-
MCU: ESP8285 / SX1280
-
Input Voltage: +5V to 8.4V
-
Antenna Connector: 2x IPEX MHF 1 (U.FL)
-
PCB Size: 19mm x 17.5mm
-
Weight: 1.49g
-
Telemetry Power: 12dBm
-
Firmware Target: Generic ESP8285 6xPWM 2.4Ghz RX (Recommended for ELRS 3.0+)
What’s in the Box?
-
1x Happymodel EPW6 TCXO Receiver
-
2x 2.4GHz Antennas
-
3x 7-Pin 2.54mm Header Pins
-
2x Stickers
