Fixed

• Add I2C function
• When you connect the USB, the receiver and OSD settings can be saved
• Increase the pad area
• LED signal selection （when Mamba Led sys available）
• BEC short circuit protection
• TVS instant high voltage protection 30V

Update

• F405 models support F.prot（Most）
• Upgrade the anti-interference cable
• Uses Type C（Most）
• The pad area of Mini flight controller (20×20) increased by 140%

Added

• Add self-recovery insurance to the receiver’s 5V power supply
• Increase the camera VCC power supply pad
• The standard flight controller (30.5×30.5) adds a spare pad
• Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference

FC Specifications

• MAMAB Basic F405MINI MK3.5
• MCU: 168MHz STM32F405RGT6
• GYRO: MPU6000
• Barometer: Yes
• OSD: Yes
• Blackbox: 16M Flash Memory
• Uarts: 5 Set
• ESC Soft: Dshot300/600
• Power Led: Yes
• LED Controller: BF LED
• RSSI: Yes
• Buzz: Yes
• Input: 2~6S Lipo (8.4~25.2V)
• TVS Protection: Yes
• BEC:3.3V 0.5A&  5V 2.5A
• MOUNTING: 20mm, M2

ESC Specifications

• MAMBA F30 MINI
• INPUT VOLTAGE: 3~5S Lipo
• CONTINUE CURRENT: 30A×4
• BURST CURRENT: 40A (10S)
• BEC: No
• Target：BLHeli_S CH40
• SOFT: Dshot300/600
• TVS Protection: Yes
• MOUNTING: 20mm, M2

Supply :

• High-Frequency 470uF/35V ×1
• 8pin sh1.0  ×2
• 16AWG 60mm ×2
• AMASS Original XT30