Hypetrain Vanover Motor 2207.5 1860Kv by Rotor Riot & Captain Vanover
THE MOTOR THAT WINS RACES, BY THE PILOT WHO WINS RACES!
The Hypetrain Vanover Motor marks Hypetrain’s first race motor offering. Designed for absolute maximum racing performance, this motor is an exceptional choice for freestyle as well – taking a ton of abuse while still staying smooth.
Developed with the direct input of Drone Racing champion Alex Vanover, the Hypetrain Vanover clocks in at 1860 KV – perfect for 6S pilots looking for a superb competition motor. Alex has already proved the performance of these motors, by taking first place at the Osijek Drone Expo 2019 in Croatia, and obtaining Fastest Lap and Fastest Qualifying 3 Lap time at the MultiGP International Open World Cup.
With a state-of-the-art 2207.5 core, the Vanover motor has an incredible response time which allows you to fly precisely on the race track. It flies smooth, and has a very predictable throttle curve. The motor core is made with single strand, heat resistant copper windings. This optimized configuration allows advanced pilots to run a lower demag setting, which results in increased power output and efficiency with reduced risk of desync.
With these motors on your quad, you will not only have the fastest quad on the track, but also the best looking one. If you ask Alex, the navy blue bell cuts through the air faster than any other color!
This seems to be the only motor on the market that provides screws with different sizes to fit your different carbon frame thicknesses! Thanks Alex Vanover!
Check out our entire motor selection!
Check out our Hypetrain selection of motors!
Specifications
-
Weight: 29.5 grams (without wires)
-
KV: 1860KV
-
Stator Diameter: 22 mm
-
Stator Height: 7.5 mm
-
Propeller Shaft Size: M5
-
Wires: 120 mm 20AWG Silicone Sheath
-
Bell Material: 7075-T6 Aluminum
-
Magnets: N52 Curved Magnets
-
Mounting Screw Pattern: 16×16 mm
-
Input Voltage: 4-6S
Includes
- 1x Hypetrain Vanover 2207.5 1860KV Motor
- 1x M5 Nylock Propeller Nut
- 5x M3 x 6mm Mounting Screws
- 5x M3 x 7mm Mounting Screws
- 1x Sticker