Split 3 Micro

Capture stunning 1080p/60fps HD footage without the weight of a separate action camera with the RunCam Split 3 Micro. This innovative 2-in-1 solution combines a high-quality HD recording module and a low-latency analog FPV camera into a single, lightweight package. It’s the perfect choice for FPV pilots who want to record their freestyle flights in beautiful HD on drones that are too small for a bulky action cam.

All-in-One HD Recording & FPV

The Split 3 Micro solves a classic FPV problem: getting great HD footage from a lightweight drone. It functions as your primary FPV camera, sending a low-latency (40ms) analog video feed to your goggles for a responsive flight experience. Simultaneously, it records crisp 1080p/60fps video directly to an onboard Micro SD card, giving you GoPro-like quality at a fraction of the weight and cost.

Reliable & Resilient Design

RunCam has packed the Split 3 with features to protect your precious footage. The anti-drop SD card protector helps prevent your card from ejecting in a crash. Power-off protection ensures your video file is saved correctly even if your battery gets disconnected unexpectedly. A new, stronger, flexible ribbon cable connects the camera and board, increasing durability where it’s needed most.

Key Features:

• 2-in-1 FPV & HD Recording: Get a live FPV feed and record 1080p/60fps HD video from a single, lightweight unit.
• Lightweight at 14g: Capture HD footage on drones that are too small or light to carry a full-size action camera.
• Power-Off Protection: Automatically saves your video file in the event of a crash or battery disconnect, preventing corrupted files.
• Anti-Drop SD Card Protector: A physical guard helps keep your Micro SD card securely in place during hard impacts.
• WDR FPV Feed: The live FPV camera features WDR for a clear image, helping you navigate in challenging lighting.
• 20x20mm Mounting: The main board easily mounts on top of a standard 20x20mm FPV drone stack.

IMPORTANT: Power Requirements

The Split 3 Micro has a wide input voltage of 5-20V, however, it MUST be powered by a regulated source (BEC) from your flight controller or PDB. Do NOT power it directly from a 4S or 5S LiPo battery, as the voltage spikes during power-up can permanently damage the camera.

Specifications

• Model: RunCam Split 3 Micro
• Video Resolution: $1080@60\text{fps}/1080@50\text{fps}/1080@30\text{fps}/720@60\text{fps}$
• FPV FOV: 130∘ @4:3, 165∘ @16:9
• Recording FOV: 165∘
• FPV Latency: $40\text{ms}$
• Power Input: DC $5\text{V}-20\text{V}$ (Must be a regulated source)
• Mounting: Main Board – $20\text{x}20\text{mm}$ / Camera – $19\text{x}19\text{mm}$
• Weight: $14\text{g}$

What’s in the Box?

• 1x RunCam Split 3 Micro Camera & Board
• 1x 19mm to 28mm Mounting Bracket
• 1x SD Card Protector
• 1x FPV Silicone Cable
• 1x Set of Screws
• 1x User Manual

• FPV (4:3 / 16:9 auto adaptation)

  HD recording (16:9)

  

  Split 3 Micro Package

  • 
    1x Camera
  • 
    1x 19 to 28 bracket
  • 
    1x Plastic cover
  • 
    1x 3PIN 1.25 JST Silicone Cable
  • 
    1x Set of M2 screws
  • 
    1x Manual

  Split 3 Micro Dimensions

  

  Dimension including the 19 to 28 bracket

  

Split 3 Micro Manual

RC_Split_3_series_Manual_EN