GOKU H743 30×30 Flight Controller

Check out all of our Flywoo products!

Build your ultimate cinema rig or long-range explorer with the Flywoo GOKU H743 Pro Flight Controller. As Flywoo’s flagship 30×30 FC, this board is a computing powerhouse designed to run the most demanding firmware features without breaking a sweat. Whether you are building an X8 Cinelifter, a GPS rescue cruiser, or a top-tier freestyle quad, the GOKU H743 is the brain your drone deserves.

Unleash H7 Computing Power

At the heart of this board lies the blazing-fast STM32H743 chip running at 480MHz. This immense processing power eliminates CPU load bottlenecks, allowing you to run high loop times, complex bi-directional DShot filtering, and GPS navigation tasks simultaneously. It is fully compatible with Betaflight, INAV, and Ardupilot, giving you the freedom to fly your way.

Dual Gyro Stability

Smooth footage starts with clean data. The GOKU H743 Pro utilizes Dual ICM42688P Gyroscopes. By running two gyros simultaneously, the controller can average the data to significantly reduce noise and latency. The result is a “locked-in” flight feel and cleaner Blackbox logs, making tuning easier and flight performance superior.

Built for Professionals (X8 & Long Range)

This FC is an I/O monster. It features 8 motor outputs, enabling native support for X8 multi-rotor configurations without complex resource remapping. With 7 UART ports, integrated dual-camera switching, and a barometer, it is ready for complex long-range setups. To support your HD video systems (like DJI O4/O3) and peripherals, it includes robust Dual BECs (10V/3A and 5V/3A) for stable power delivery.

Massive Onboard Storage

Forget about SD cards vibrating loose. The GOKU H743 Pro features a massive 512MB onboard Blackbox flash memory. This provides ample space to log full-resolution flight data for extended sessions, allowing for deep analysis of your PID tuning and filter settings.

Key Features:

• H7 Core: 480MHz STM32H743 MCU for future-proof performance.

• Dual Gyros: Two ICM42688P sensors for noise reduction and precision.

• X8 Ready: 8 Motor outputs for heavy-lift Cinelifters.

• Massive Logging: 512MB internal Blackbox memory.

• Connectivity: 7 UARTs + I2C for GPS, Lidars, and peripherals.

• Dual BECs: 10V/3A & 5V/3A for powering VTX and accessories.

Specifications:

• MCU: STM32H743VIH6 (480MHz)

• Gyroscope: 2x ICM42688P (Dual)

• Barometer: DPS310 / SPL06

• Blackbox: 512MB Onboard

• UARTS: 7 (1/2/3/4/6/7/8)

• Input Voltage: 7.4V-26V (2-6S LiPo/LiHV)

• BEC: 10V/3A and 5V/3A

• Mounting: 30x30mm (M3)

• Dimensions: 36.5mm x 36.5mm x 8.45mm

• Weight: 9.9g

• Firmware Target: Flywoo H743PRO (Betaflight/INAV/Ardupilot)

What’s in the Box?

• 1x Flywoo GOKU H743 Pro 30×30 Flight Controller

• 1x Cable Connection Set (For ESC, VTX, RX, Cameras, etc.)

• 1x Mounting Hardware Kit (Shock-absorbing balls)