M2/ M3 Hardware Pack
Check out all of our Flywoo products!
Stop searching the floor for that one missing screw. The Flywoo Hardware Pack is the all-in-one solution for every FPV pilot, from beginners to pro builders. Available in two comprehensive variations—M2 (for Micro/Whoop builds) and M3 (for 5-inch/Standard builds)—this kit ensures you have exactly what you need to finish your build or repair your drone in the field.
More Than Just Screws
This isn’t just a box of fasteners; it is a complete support kit for your workbench. Beyond a massive assortment of screws, each pack includes essential electronics and frame hardware that pilots often run out of, including Capacitors for noise filtering, Power Connectors (XT30 or XT60), and vibration-damping rubber balls to soft-mount your stacks.
Choose Your Version:
Option 1: M2 Hardware Pack (For Micros & 2-3″ Drones)
Tailored for sub-250g builds, Cinewhoops, and Toothpicks. This pack focuses on the M2 standard used in 16×16, 20×20, and 25.5×25.5 stacks.
-
Essential Spares: Includes 5x Male XT30 connectors and 30x Nylon Standoffs.
-
Vibration Control: Includes M2 damping balls and rings for Flight Controllers.
-
Screw Variety: Cup head screws ranging from 4mm to 20mm.
Option 2: M3 Hardware Pack (For 5″ Freestyle & Long Range)
The standard for 5-inch frames and larger. This pack covers motor mounting, frame assembly, and stack securing.
-
Essential Spares: Includes 4x Male XT60 connectors and 10x M5 Motor Lock Nuts (Prop nuts).
-
Vibration Control: Multiple sizes of M3 damping balls (8mm and 4.5mm).
-
Screw Variety: A mix of Cup Head and Round Head screws from 5mm to 16mm.
What’s in the Box? (Content Lists)
| M2 Pack Contents (Micro) | M3 Pack Contents (Standard) |
| Screws (Cup Head): | Screws: |
| 60x M2*4mm | 60x M3*5mm (Cup Head) |
| 60x M2*5mm | 60x M3*6mm (Round Head) |
| 60x M2*6mm | 50x M3*8mm (Round Head) |
| 60x M2*7mm | 40x M3*10mm (Round Head) |
| 60x M2*8mm | 40x M3*12mm (Round Head) |
| 40x M2*10mm | 30x M3*14mm (Cup Head) |
| 40x M2*12mm | 30x M3*16mm (Round Head) |
| 40x M2*20mm | |
| Hardware & Electronics: | Hardware & Electronics: |
| 30x M2*4 Nylon Standoffs | 30x M3 Nylon Hex Lock Nuts |
| 20x M2 Hex Lock Nuts | 10x M5 Motor Lock Nuts |
| 20x M2 Press Nuts | 20x M3 Press Nuts |
| 20x M2 1mm Nylon Gaskets | 20x M3 1mm Nylon Gaskets |
| 20x M2*6.6 Damping Balls | 20x M3*8mm Damping Balls |
| 20x M2 Damping Rings | 20x M3*4.5mm Damping Balls |
| 2x 35V 470uF Capacitors | 20x M3 Damping Rings |
| 2x 25V 220uF Capacitors | 2x 35V 470uF Capacitors |
| 5x XT30 Connectors (Male) | 2x 25V 220uF Capacitors |
| 4x XT60 Connectors (Male) |
