Runcam Nano7
Check Out Our Other Happymodel Products!
Keep your ultra-light micro drone performing at its peak with the Happymodel Nano7 Camera. Manufactured in collaboration with RunCam, this is the official stock camera found on the Mobula6 2024 Analog. Weighing in at a mere 1.8g (including the cable), it is engineered to save every fraction of a gram, ensuring your whoop stays agile and responsive.
Big Performance, Nano Footprint
Despite its tiny size, the Nano7 features a 1/3″ CMOS Sensor, offering better light handling and dynamic range than typical 1/4″ sensors found in this weight class. It outputs a native 4:3 Aspect Ratio, matching the display format of most analog FPV goggles for a distortion-free, immersive image.
Wide Field of View
Navigate tight indoor spaces with confidence. The Nano7 comes equipped with a lens providing a 150° Diagonal Field of View (FOV). This wide perspective gives you the peripheral vision needed to hit small gaps and react quickly to obstacles in your living room race track.
Standard Nano Fitment
The camera features standard 14mm x 14mm dimensions, making it compatible not just with the Mobula6 2024 canopy, but also with a wide variety of 65mm and 75mm whoop canopies. It operates efficiently on 3.3V to 5V, making it plug-and-play with almost all 1S AIO flight controllers.
Key Features:
-
Ultra-Light: Only 1.8g (with cable) for maximum flight performance.
-
Official Part: Direct replacement for the Mobula6 2024.
-
Large Sensor: 1/3″ CMOS for clear analog video.
-
Wide Angle: 150° FOV for excellent situational awareness.
-
Efficient: Low power consumption (0.5W).
Specifications:
-
Model: Happymodel Nano7
-
Sensor: 1/3″ CMOS
-
Resolution: 800TVL (Estimated based on RunCam Nano specs)
-
Aspect Ratio: 4:3
-
FOV: D:150° / H:120° / V:98°
-
Shutter: Rolling Shutter
-
Input Voltage: DC 3.3V ~ 5V
-
Power Consumption: 0.5W
-
Dimensions: 14mm x 14mm x 13mm
-
Weight: 1.8g (With Cable)
What’s in the Box?
-
1x Happymodel Nano7 CMOS Camera
