Zeus35 AIO 3-6S

Check out all of our HGLRC Products!

Experience the perfect blend of power, reliability, and convenience with the HGLRC Zeus35 All-in-One Flight Controller. This compact 20x20mm board is the ultimate centerpiece for a wide range of FPV builds, from 100mm micro drones to powerful 250mm (5-inch) freestyle rigs. By combining a robust flight controller and a 35A 4-in-1 ESC onto a single board, the Zeus35 simplifies your build, reduces weight, and provides a clean, professional look.

The Zeus35 is built to perform. It features a reliable STM32F411 processor paired with the classic MPU6000 gyro, a combination trusted by pilots for a smooth and locked-in flight feel. The onboard 4-in-1 ESC can handle a continuous current of 35A and supports a wide 3-6S LiPo input voltage, giving you the flexibility to build for mellow cruising or aggressive, high-power freestyle.

Packed with premium features, the Zeus35 includes a generous 16MB of onboard blackbox memory for easy tuning and troubleshooting, a 5V/2A BEC to power your peripherals, and versatile mounting that supports both M2 and M3 hardware (red version). With clearly assigned UARTs for your receiver and VTX, setup is straightforward, getting you in the air faster.

Key Features:

• All-in-One Compact Design: Simplifies your build by combining the FC and ESC on a single 10g board with a 20x20mm mounting pattern.
• Powerful 35A 6S ESC: Provides ample power for a wide range of motors and props, with the flexibility of using up to 6S LiPo batteries.
• 16MB Onboard Blackbox: A generous amount of memory for logging flights, making it easy to fine-tune your PIDs and filters for peak performance.
• Proven F411 + MPU6000 Combo: A reliable processor and gyro combination that delivers a stable and responsive Betaflight experience.
• Versatile Mounting: The 20x20mm mounting holes support both M2 and M3 screws (red version), allowing for easy installation in more frames.
• Dedicated UARTs: Clearly defined ports for your VTX/DJI unit (UART1) and Receiver (UART2) simplify wiring.

Specifications:

General:

• Input Voltage: 3-6S LiPo
• Firmware Target: HGLRCF411
• Mounting: 20x20mm, M2/M3
• Dimensions: 40x32mm
• Weight: 10g

F411 Flight Controller:

• CPU: STM32F411
• MPU (Gyro): MPU6000
• Blackbox: 16MB
• OSD: Supported
• BEC: 5V/2A
• UARTS: 2 (UART1: VTX, UART2: Receiver)

35A BLHeli_S 4-in-1 ESC:

• ESC Firmware: BLHeli_S
• Constant Current: 35A
• Peak Current: 40A (10 seconds)
• Current Sensor: Supported