Pavo20 Pro II Brushless Whoop Quadcopter

Check out all of our BetaFPV Products!

Redefine lightweight freestyle with the BetaFPV Pavo20 Pro II, the next-generation 2.2″ cinewhoop engineered specifically for the DJI O4 and O4 Pro Air Units. Weighing in at just 107.7g (with O4 Pro), this drone is the perfect gateway for DJI pilots to dive into high-performance FPV. It combines an aerodynamic thrust-boosting frame, explosive LAVA Series motors, and the vibrant NightFire RGB system to deliver a professional freestyle experience in a compact package.

Optimized for DJI O4 & O4 Pro

The Pavo20 Pro II isn’t just compatible; it’s optimized. The redesigned carbon plate and O4 Air Unit Pro Bracket seamlessly integrate the heavier O4 Pro unit without sacrificing agility. The bracket features dual fixing holes for smooth 0-40° camera tilt, 30° angled antenna mounts for superior signal, and a reinforced structure that ensures vibration-free, jello-free HD footage.

• Plug-&-Play Tuned: Comes with pre-optimized PID parameters for both O4 and O4 Pro configurations—simply select your setup via OSD and fly.

Next-Gen Frame & Assembly

Building and maintenance have never been easier. The upgraded “Frame II” utilizes a supported structure with embedded nuts, allowing for a secure, rigid assembly with just 4 screws. The crash-proof PA12 thickened ducts are aerodynamically designed to compress airflow, providing an 8-11% thrust boost compared to standard designs.

Explosive Freestyle Propulsion

This isn’t just a cruiser; it’s a freestyle ripper. The Pavo20 Pro II pairs LAVA 1104 7200KV Brushless Motors with co-developed Gemfan 2218 3-Blade Propellers. This combination delivers a remarkable 6.23:1 thrust-to-weight ratio, giving you the power to pull out of dives and hit gaps with precision. Powered by a 3S 550mAh battery, expect up to 6.5 minutes of flight time.

Crisp Control & RGB Style

At the heart of the drone is the ultra-light F4 2-3S 20A AIO FC V1. Weighing only 5.92g, it provides the computing power needed for crisp digital response. To match the performance with style, the drone includes the NightFire RGB LED Strip, offering 10 preset lighting effects to enhance visibility and make your flights look as good as they feel.

Key Features:

• O4 Pro Ready: Specifically designed to carry the DJI O4 Pro Air Unit.

• Thrust Boost: Aerodynamic frame and 2.2″ props add 8-11% more thrust.

• Rigid Design: New 4-screw assembly with PA12 crash-resistant ducts.

• NightFire LEDs: Integrated RGB strip with customizable effects.

• ND Filter Ready: The Bracket allows unobstructed access for ND filters.

• Plug-and-Play: Pre-tuned PIDs for instant performance.

Specifications:

• Model: Pavo20 Pro II Brushless Whoop Quadcopter

• Wheelbase: 93.9mm

• Flight Controller: F4 2-3S 20A AIO FC V1

• Motors: LAVA Series 1104 | 7200KV

• Propellers: Gemfan 2218 3-Blade (1.5mm Shaft)

• Receiver: Serial ELRS 2.4G

• Battery Connector: XT30

• Recommended Battery: LAVA 3S 450mAh or 550mAh 75C

• Weight: 65.2g (PNP without VTX) / ~107.7g (with O4 Pro installed)

• Flight Time: Up to 6 mins 30 sec (w/ 3S 550mAh)

What’s in the Box? (O4 Pro Version)

• 1x Pavo20 Pro II Brushless Whoop Quadcopter (with O4 Pro VTX installed)

• 4x Gemfan 2218 3-Blade Propellers

• 1x RGB LED Strip (500mm) & RGB Board

• 1x Type-C to SH1.0 Adapter

• 1x Hardware Kit & Cables

• 1x O4 Air Unit Pro User Manual