iFlight XL5 V3 226mm FPV Racing Drone (PNP)
With its ‘True X’ structure, you can easily race or freestyle with this drone. Updated with the new V3 version of the XL5 Frame from iFlight. Using the beastly iPower 2207 2300Kv motors, and Nazgul T5061 props, it can reach maximum speeds of up to 190km/h (118mph)! It comes with a great 4-in-1 BLHeli – S 30A DShot 600 ESC, and F4 V3 Flight Controller Betaflight Ready. The iFlight XL5 can meet the demands of Racing and Freestyle at the same time! It has a very powerful switchable VTX. XT60 Connector. It even has a 3D Printed Antenna Mount for Easy Antenna installation, keeping it out of the way of the props. iFlight has really raised the bar with the price vs quality. Come with RHCP Antenna that is Red making it match beautifully with it’s Red motors. This Antenna was designed by Maarten Baert.
Note: Picture Reflects V2 Camera This Version Which is V3 has an Updated RaceCam.
Features:
● F4 V3 flight controller with OSD, support Betaflight Tuning;
● 4-in-1 BLHeli – S 30A ESC supports the latest DShot 600 digital signals etc.
● Endless iPower Force 2207 2300KV power motor with Nazgul T5061 3-blade prop
● 5.8G 72CH 25MW 200mw 600MW Switchable Video Transmitter, 1179 800TVL CCD camera
● Split Structure with replaceable arms, lower replacement cost.
Has OMNIBUSF4SD Firmware and comes stock with Betaflight 3.5.1
Specifications:
- Wheelbase: 226mm
- Frame: XL5 V3
- Receiver: Ready for receiver of your choice.
- Includes Beeper.
- Flight Control: F4 V3 Tower
- ESC: 30A（BLHeli 2-4S）DShot 600
- Brushless motor：iFlight Force 2207 2300KV
- VTX：5.8G 72CH 25MW 200mw 600MW Switchable VTX
- Camera：1179 800TVL CCD camera 1/2.7″ 2.1mm 5MP
- Propeller：iFlight Nazgul T5061
- Max Take Off Weight: 552g
- Weight: 348g ( not including battery )
- Thickness:
- Arm: 4mm
- Top Plate: 2mm
- Upper Plate: 2mm
- Bottom Plate: 2mm
- Standoff Height: 30mm
Package Contents:
1 x 5 inch Plug-N-Play Drone (Just add receiver and go)
1 x Antenna
2 x Complete Prop Set
1 x Battery Strap
1 x Capacitor
1 x Extra Screw Set
1 x Camera Remote
1 x Sticker Set
1 x Battery Foam Pad
1 x Extra Wires and Connectors
