Druckbär Ultralight 4 FPV Frame
EASY ——- STABLE ——– RADICAL
That’s what the new Druckbar Ultralight 4 stands for. After a complete new development, the Ultralight 4 leads the competition in terms of lightweight construction and impresses with a weight of just 25.4g in the standard 5 inch version.
This does not use full size mini quad motors. This uses micro FPV motors. The lightweight construction outweighs the power loss from the bigger motors. Fly faster because you’re lighter!
Weight:
3 inches: 21.2g
4 inches: 24.0g
5 inches: 25.4g
6 inches: 28.0g
Whether a beginner or more advanced – the Ultralight 4 is fast! Due to its low weight and design, it keeps agile flight behavior, an optimal training device. The new modular design of the Ultralight 4 allows you to uncompromisingly upgrade to an Ultralight 4 Race at anytime.
Replacement arm for free:
Since even the best pilots are not saved from crashing, your Ultralight 4 will come to your home with 5 arms as standard. Thus, the first broken arm goes on the house and thanks to the simple change mechanism, you are ready to use again quickly and your Ultralight where it belongs: in the air!
Get more replacement arms for your Ultralight 4 here.
Complete hardware compatibility:
You do not want to use 20x20mm hardware? No problem! Just choose the “Conversion Kit” when ordering and you can run your Ultralight with 30.5 x 30.5mm hardware. This is even easier than with its predecessor. Of course you can continue to use 20x20mm hardware.
More space:
The Ultralight 4 has become more spacious. We chose the new modular center-piece for a height of 25mm. So you have enough space for your components!
You want to install a Runcam Split Mini V2? No problem, the height is enough!
Includes
1x A-plate with carbon threads (2,5mm)
1x B-plate (2,5mm)
2x camera
plate (2mm) 1x top plate (1,5mm)
5x arm (3,5mm) *
4x aluminum spacers M2x25
5x stainless steel countersunk screw M2x5mm
5x stainless steel countersunk screw M2x10mm
5x stainless steel countersunk screw M2x12mm
2x cable ties 1.6 x 71mm
5x TPU M5 propeller nut
incl. option Lipo Strap:
1x Druckbär Lipo Strap 14,5 x 190mm
incl. hardware option 30.5 x 30.5mm:
4x pressure bear M2-M3 adapter
1x enlarged top plate (1.5mm) instead of normal top plate
* 3mm for the 3 inch version