
GEPRC GEP-F722-45A AIO
GEP-F722-45A AIO adopts MCU STM32F722, which has powerful performance and higher computing speed. It has 5 full UART ports and can connect more external devices.
We designed a 6-pin connector for DJI AIR UNIT MODULE,plug and play.
The BLheili_S 45A ESC can handle 45A continuous current(55A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.It can support OSD parameter adjustment, buzzer, led and other functions. It is 8.8g ultra light weight, and 25.5mm * 25.5mm mounting hole, suitable for most of the frames on the market.
We pursue lighter weight, smaller volume, more functions and better performance Flight controller.
Changelog:
June 5th,2022: this flight controller has started to use a new MOS tube, the appearance has changed, but the performance is the same as before.
June 25th,2022:Mounting Hole Size changed from 26.5×26.5mm to 25.5×25.5mm.
Specification:
- Model Name:GEP-F722-45A AIO
 - MCU:STM32F722
 - IMU:MPU6000 gyro/accelerometer(SPI)
 - Firmware target:GEPRC_F722_AIO
 - OSD:Betaflight OSD w/ AT7456Ev
 - UART Ports:Â R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
 - Beeper:YES
 - LED:YES
 - USB:Micro USB
 - BEC output:5V@1A
 - Intergrated LC Filter
 - ESC MCU:8BB21F16G
 - Continuous current:45A
 - MAX current:55A (10s)
 - Input:2~6S
 - Supports:Dshot600,Oneshot,Multishot
 - BlackBox:Â 16Mb
 - Traget:G_H_30
 - Size:32x32mm Board
 - Mounting Hole:25.5×25.5mm
 - Weight:8.8g
 
Features:
- MCU:STM32F722,with strong performance and higher computing speed.
 - It has 5 full UART ports, which can connect more external devices
 - Design 6p connector for DJI AIR UNIT MODULE, and just plug and play .
 - The BLheili_S 45A ESC can handle 45A continuous current(55A burst), totally support the 2-6S lipo battery, which can bring the drone a stronger flight performance.
 - Support OSD parameter adjustment, buzzer, led and other functions.
 - 8g ultra light weight
 - 5mm * 25.5mm mounting hole, suitable for most frames
 
Includes:
- 1 x GEP-F722-45A AIO
 - 1 x XT30-7CM-18AWG Power cables
 - 1 x 35V220UF capacitor
 - 1 x SH1.0-6Pin to GH1.25-8Pin cables
 - 8 x M2*6.5mm Damping rings
 





				

