FlightOne Millivolt V2 Flight Controller
***Note: The V2 Millivolt Requires the connector but does not come with one. The Spark 4n1 ESC does come with the connector. If you plan on using the Millivolt v2 with another 4n1 ESC, make sure to add a connector as there are no direct solder pads for power and signal lines.
The Millivolt V2 Flight Controller is more proof that big things come in small packages. A powerful Flight Controller from FlightOne, a company that makes a line of great products for FPV. Has built-in anti-vibration features that help keep your flight smooth. Race at your best even with the powerful F405 flight controller.
Specifications:
The Millivolt flight controller comes pre-loaded with FlightOne One. The configurator and latest stable build can be downloaded from https://flightone.com/download . No drivers simply plug in the Millivolt and it automatically connects to the Configurator
Setup Simplicity
Setting up the Millivolt is easy.  The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and the wizard handles the rest,  you can put the Revolt in upside down and backwards just solder to the closest motor pad and the FlightOne wizards will handle the rest. The Millivolt also features DFU (sometimes DFU mode is required to get the latest bootloader and use software that we don’t write) free updating and a self-healing and updating bootloader, just in case something does go wrong.
Features
- Weight: 3.3 grams
- Integrated Vibration Dampening FlightOne Gummies
- Inverter for Taranis and Futaba radios
- 3.3v or 5.0v for Spektrum, Taranis, etc
- LED Driver for WS2812b programmable LED
- High Speed 32khz gyro
- Through hole solder pads – forms an I-Beam when soldered for extra strength
- FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
- Integrated buzzer driver
- Voltage and current ADC pins, for full voltage and current monitoring
- Full telemetry output support
- ESC flashing and configuration built into configurator
- Most active software development
- 3.3v and 5v voltage outputs
- 2 serial uarts
- Bluetooth expandable
- F4 processor
- 16mb of flash memory
- GPS expandable
- Pins into The FlightOne Spark Micro 4in1 ESC
- Dimensions: 25mm x 25mm
- Mounting holes: 20mm squared to center of holes
