Holybro Kakute F7 Mini V2 Flight Controller
This is the HolyBro F7 Mini v2 Flight Controller, this is where you can get all the power you need in a snack size. It will fit your 20×20 builds.
Check out our entire HolyBro line of products.
A B+ pad is available on the KakuteF7 mini V2, along with the IMU upgraded into an MPU6000
- MCU: STM32F745VGH6 32-bit processor,216MHz, 320Kbytes RAM, 1Mbytes Flash
- IMU: MPU6000 (SPI)
- Barometer: BMP280
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 5.5 hardware UARTS (UART1,2,3,4,6,7)
- Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
- Onbord 16Mbytes for Blackbox logging
- 5V Power Out: 1.0A max
- 3.3V Power Out: 0.2A max
- Dimensions: 33x26x6mm
- Mounting Holes: Standard 20mm square to center of holes
- Weight: 4g
M2 Rubber rings *4
JST SH 8pin 150mm cable*1